beautypg.com

Baron Air & Fuel_AIR INJECTION SYSTEM KIT Yamaha Road Star_V-Star1100 User Manual

Page 2

background image

Page: 2

BA-2521-00
AIR INJECTION REMOVAL KIT - Yamaha - Road Star (99-03)
& V-Star 1100 (All) Models

NOTE: On V-Star 1100s, the pump is located under left side chrome cover near battery. Trace vacuum hose up
to intake manifold, remove hose and save the clamp. Install supplied rubber cap onto this vacuum tap using the
stock clamp.
Reinstall rectifier/regulator to its stock location.

3. Use a large (minimum 12 inches) heavy-duty flat-blade screwdriver or other suitable driver long enough to
reach each 90-degree air fitting from right side of bike (Fig. D).

Insert the tool into elbow area of the air fitting and FIRMLY drive the fitting from cylinder head with a
hammer (Fig. E).

NOTE: The air fittings are very tight in the cylinder head. We have found that when driving out the air fittings,
the 90-degree joint may start to tear apart. If this happens, simply insert your removal tool into the hole in the

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

© 2013 Barons Custom Accessories

5221 Oceanus Drive

Huntington Beach, CA 92649

(925)583-2499 - Ph.

(714)901-0520 - Fax

www.baronscustom.com

[email protected]