Baron Footrest & Controls_PASSENGER FLOORBOARD BRKTS - Yamaha V-Star 950-1100-1300 - Manual

Page: 1 BA-7040-00
Passenger Floorboard Brackets
Yamaha, V-Star 950, 1100 & 1300
We recommend the use of Blue Locktite® on all floorboard mounting
hardware and that all mounting hardware be retightened after 100 miles.
Revision: 2.6 - 12/07/2009
Install Time: 20 minutes
INCLUDED IN THE KIT:
Left & Right Black Mounting Brackets
(2) 3/8-16 x 3/4" SS Flathead Socket Cap
1/4-20 x 1/2" Flathead Socket Cap
5/32" Long Hex/Allen Wrench
(4) M8-1.25 x 45mm Hex Head Bolt Chrome
(4) M8-1.25 x 55mm hex Head Bolt Chrome
(4) M8 Flat Washers Chrome
TOOLS REQUIRED:
Allen Wrenches
10 & 12 mm Wrenches
Blue Locktite®
INSTRUCTIONS:
1. Remove the Baron Sport Boards from their packaging, you will find they come with two chrome Pivot
brackets attached. The Pivots are what allows the floorboard to attach to the mounting brackets (Sold
Separately) and how the boards tilting can be adjusted.
2. Attach the Pivot to the Floorboard Mounting Bracket using the supplied hardware that comes with the
floorboards. Snug the larger bolts up but do not tighten. Take the small 1/4-20x 1/2" Flathead Allen screw and
thread them through the small hole/s in the Pivots and into the mounting bracket.
NOTE: You must first select your preferred hole. (The upper hole will place the floorboards in a flat position
and the lower hole/s provides an angled mounting position for added comfort and control).
SUGGESTION: The second hole is the most preferred position. Once selected you may now tighten all Flathead
hardware.
3. Remove stock pegs/floorboard mounts from your motorcycle.
4. The mounting brackets are left and right side specific. Install Baron mounting brackets in same holes vacated
when you removed the stock mounts using the supplied hardware.
NOTE: See specific instructions that may be included with the mounting brackets for specific instructions.
REMEMBER: Use Blue Locktite®
CAUTION:We recommend you re-tighten all mounting bolts after 100 miles.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]