Baron Air & Fuel_BIG AIR KIT ENFERNO Yamaha V-Star 650 - Manual

Page: 1 BA-2011-00/03/06/07/13/13B
BIG AIR KIT - YAMAHA V-Star 650
CAUTION! We Strongly recommend that a qualified technician install this
kit if you do not completely understand the instructions prior to the install.
Revision: 2.6 - 03/30/2010
Install Time: 60 Minutes
INCLUDED IN THE KIT:
(1) Billet BAK Cover
(1) Re-usable Performance Air Filter
(1) Baron Jet Kit (BA-2410-00)
(2) Mounting Arm SS
(3) M5-.8 x10 Button Head Screw SS
(2) M6-1.0 x12 Socket Head Screw Chrome
(1) M8-1.25x30 Button Head Screw SS
(1) Black BAK Backing Plate
(1) BAK Filter Raincoat
(2) 1/4-28 x 1 13/16" Hex Bolt Zinc
(2) 1/4" Lock Washer
(2) Aluminum Filter Spacer
(2) M6 Chrome Washer
(1) Tube Rubber Cement
TOOLS REQUIRED:
3, 4 & 5 mm Allen Wrenches
10mm Open-end Wrench
Pliers (Std. & Needle-nose)
10 & 12mm Sockets
Phillips & Flat Screwdrivers
Factory Service Manual
INSTRUCTIONS:
1. Remove fuel tank and air filter assembly per Yamaha service manual procedures.
2. Remove the air silencer box under the tank.
3. Install supplied BA-2410-00 Needle/Jet kit according to the instructions in the jet kit package being sure to
use the Jets and Needle Slot setting called out for the external BAK filter assemble.
4. Reinstall the air silencer box under the tank.
5. Remove the rubber boot from the stock air box. It is glued-in from the factory, but will come loose if gently
persuaded. See photo #1
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]