beautypg.com

Baron Chrome Shop_AXLE NUT_FORK COVERS - CHROME User Manual

Ba-7800-xx – chrome axle nut covers

background image

7401 Slater Ave. ● Huntington Beach, CA 92647● (760) 731-1200 – Ph. ● (760) 731-1284 – Fax ● www.baronscustom.com ● [email protected]

Revision 5.0 (6/17/2009)

BA-7800-xx – CHROME AXLE NUT COVERS

INCLUDED IN THE KIT:

(2) Axle Nut Covers, chrome

(4) M6x10 set screws

(1) Honda bolt kit

INSTRUCTIONS:

1. Slide your new Baron Axle Nut Covers into position on the bottom of

each front fork leg until seated.

2. Rotate as needed for best coverage. A cut out has been provided for

speedometer drive cable clearance on models so equipped.

3. Tighten (2) set screws to secure.

4. Honda models require our included BA-7800-01, Bolt Kit to replace

stock pinch bolts (2 per fork leg).






















CAUTION! We Strongly recommend that a qualified

technician install this kit if you do not completely

understand the instructions prior to the install.

Our install guides provide a basic outline on the proper installation of our products. Further tuning

and/or fitment may be required. Baron bears no responsibility on installation costs associated with this

product.

© 2009 Baron Custom Accessories