beautypg.com

Baron Air & Fuel_BIG AIR KIT -- PINSTRIPE, CHROME Kawasaki Vulcan 900 User Manual

Page 2

background image

Page: 2

BA-2074-00/03/06/07/13/13B
BIG AIR KIT - Kawasaki Vulcan 900 (All Models)

8. Plug connector back into temp sensor and insert remaining vent hose into the BAK backing plate. Be sure to
use all the stock hose clamps.

9. Install one lock washer on each 1/4-28 zinc hex bolt and insert through backing plate. It may be easier at this
step to tape the bolts in place from the back.

10. Fasten the BAK backing plate to the throttle body using the stock cap-head screws and a 5mm allen wrench.
We recommend blue Loctite® on these screws.

11. Slide one aluminum filter spacer onto each of the zinc hex bolts in the center of the BAK backing plate.

12. Install performance air filter and place the BAK cover in place. Make sure the grooves in the filter, cover &
backing plate all seal properly. Secure with 1/4-28 zinc hex bolts, lock washers and flat washers.

13. Clean outside of chrome BAK cover with a clean, soft cloth.

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

© 2013 Barons Custom Accessories

5221 Oceanus Drive

Huntington Beach, CA 92649

(925)583-2499 - Ph.

(714)901-0520 - Fax

www.baronscustom.com

[email protected]