Baron Tachometers_TACH MOUNT Suzuki M109 - Manual

Page: 1 BA-7368-00
BARON M109 Tach Mount
Suzuki M109
Revision: 1.0 - 02/19/2010
INCLUDED IN THE KIT:
Baron Tach Mount (2) M5x1.25x18 stainless cap head screws
TOOLS REQUIRED:
4mm Allen wrench
INSTRUCTIONS:
Thank you for purchasing the Baron M109 Tach Mount. This part requires the Baron 1-1/2" Xtreme Bar
handlebar (BA-7365-00). Installation is reasonably simple providing you follow the instructions below
implicitly. As always, please read the instructions in full prior to installing the product. If you feel you dont
understand it, please call our tech support line, or have the product installed by a competent technician.
1. Remove stock tachometer per service manual instructions.
2. Remove the stock handlebars and risers.
3. Install the Baron Xtreme Bar per instructions included with the handlebar.
4. Using the Baron Tach Mount, sandwich" the mount and the stock tachometer between the risers of the
bar. Be sure the tach is visible from the rider position, and youve allowed enough slack in the stock
wiring.
5. Tighten the Baron Tach Mount using the provided stainless cap-head screws. Make sure the tach is
straight and level.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]