beautypg.com

Baron Suspension & Lowering_REAR LOWERING KIT Yamaha Royal Star User Manual

Page 2

background image

Page: 2

BA-7504-00
REAR LOWERING KIT with CALIPER RELOCATION
Yamaha Royal Star

5. Remove caliper mounting bracket, then remove rubber cushion on swingarm post (you will reuse this
cushion and bracket).

6. Reinstall caliper mount bracket and axle, but do not relocate caliper mount on the swing arm post. Rotate
caliper mount down to the 6 o-clock position. Reinstall the caliper.

7. Slide supplied caliper stay arm on to swingarm post, then slip rubber cushion over post and up against stay
arm.

8. Insert supplied bushing into caliper mount and connect stay arm to caliper mount using supplied bolt,
washers and acorn nut. Tighten securely.

9. Tighten all other bolts/nuts and rear axle to factory specs. Connect brake line and bleed brake system per
shop manual procedures. Check for any brake fluid leaks at caliper. Lower motorcycle to ground. Recheck all
fasteners after 100 miles of riding.

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

© 2013 Barons Custom Accessories

5221 Oceanus Drive

Huntington Beach, CA 92649

(925)583-2499 - Ph.

(714)901-0520 - Fax

www.baronscustom.com

[email protected]