beautypg.com

Baron Fenders & Body Kits_GANGSTER REAR FENDER - Royal Star User Manual

Baron fiberglass fenders

background image







Baron Fiberglass Fenders

Hints, tips and precautions on installation and use of Baron Fiberglass Fenders

• Pre-fit all fenders BEFORE you paint them.
• Fenders can be trimmed/cut with a cutoff tool or dremel.
• Check clearance on lowered rear suspensions with the rear fully collapsed.
• Check front fender for corner clearance, forward control clearance, tool bag clearance.
• Check rear caliper for clearance (rear caliper can be relocated on some models).
• Check tire clearance.
• Are you frenching-in lights or license? Check the clearance.
• Drill any holes you need for seat mounting, pillion brackets, luggage mounting, light mounting, fender

trim, rear racks, license mounting, etc. prior to painting.

• Sand gel coat with 320 grit and prime.
• Finish sand primer with 400 wet/dry paper and apply base coat.

Pre mount fender before you paint!

311 #1 Industrial Way - Fallbrook, CA 92028 - USA

Phone: (760) 731-1200 Fax: (760) 731-1284

E-mail: [email protected]

Website: www.baronscustom.com