Baron Air & Fuel_BIG AIR KIT PINSTRIPE, CHROME Yamaha V-Star 650 - Manual (Page 2)

Page: 2 BA-2011-00/03/06/07/13/13B
BIG AIR KIT - YAMAHA V-Star 650
6. Install the stock rubber boot into your new Baron air filter backing plate with the supplied glue. Squeeze glue
liberally into sealing groove in stock rubber boot. See photo #2
Allow glue to set up and dry prior to mounting onto bike.
7. Install supplied mounting arms into the backing plate with supplied M5 screws.
8. Insert the included 1/4-28 x 2" Zinc Hex Bolts, lock washers & BAK spacers into the backing plate mounting
holes. Slip one aluminum filter spacer onto each bolt and attach the assembly to the BAK cover, sandwiching
the filter in-between.
9. Install the prepared air filter assembly onto the bike by sliding the stock snorkel piece into the rubber boot
on the back of the air filter and pushing the exposed screw into the grommet on the bike. Align the mounting
arms and secure them with the supplied M6 screws and chrome washers.
10. Reinstall your fuel tank and you are ready to ride.
Check throttle linkages for interference and for full range of motion, check all hoses for kinks, and check all bolts
and hardware for tightness. Also check throttle grip action for smooth operation.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]