beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 91

background image

9. 48" Head Platform Right Hand Drive

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

91

4. Install magnets (HP1648MAG) to the latch bracket (HSP4248LMM) using #10-24 HWHS screws

(S-6145) and #10-24 nylock nuts (S-2010).

5. Open hatch fully and note where it rests against the platform post. Lower the hatch.

6. Install “X” Series latch bracket assembly (HSP4248LMM and HP1648MAG) to this post where the

hatch meets the post using 5/16" x 1" flange bolts (S-7470) and 5/16 flange nuts (S-3611) through
the holes in the side of the post.

7. Raise the hatch, making sure it is flush against the magnets and holds the hatch securely in place.

Figure 9V

See also other documents in the category Grain Systems Equipment: