Ladder assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual
Page 12
5. Ladder Assembly
12
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Supported Bucket Height Reference Chart for 48"
NOTE: Ladders are of a modular design for ease of modification in the field. These illustrations are only
to be used as a “general” guide to installation layout. The exact assembly may vary due to the unique
nature of each bucket elevator.
to help determine if the ladders should be started on the up-leg or
down-leg of the elevator and also aid in the ladder order and rest platform locations for bucket elevators
with heights from 50' through 230'.
Part #
Supported Bucket Height (Ft.)
Part #
Supported Bucket Height (Ft.)
48XRLAD50
50-59
48XWLAD50
50-59
48XRLAD60
60-69
48XWLAD60
60-69
48XRLAD70
70-79
48XWLAD70
70-79
48XRLAD80
80-89
48XWLAD80
80-89
48XRLAD90
90-99
48XWLAD90
90-99
48XRLAD100
100-109
48XWLAD100
100-109
48XRLAD110
110-119
48XWLAD110
110-119
48XRLAD120
120-129
48XWLAD120
120-129
48XRLAD130
130-139
48XWLAD130
130-139
48XRLAD140
140-149
48XWLAD140
140-149
48XRLAD150
150-159
48XWLAD150
150-159
48XRLAD160
160-169
48XWLAD160
160-169
48XRLAD170
170-179
48XWLAD170
170-179
48XRLAD180
180-189
48XWLAD180
180-189
48XRLAD190
190-199
48XWLAD190
190-199
48XRLAD200
200-209
48XWLAD200
200-209
48XRLAD210
210-219
48XWLAD210
210-219
48XRLAD220
220-229
48XWLAD220
220-229
48XRLAD230
230-239
48XWLAD230
230-239
CAUTION
Due to O.H.S.A. standards, it is required that a rest platform be installed every 30'.