beautypg.com

Install rest platform mounting channels – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 42

background image

7. Rest Platform

42

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

Install Rest Platform Mounting Channels

1. Fasten rest platform mounting channels (RSP48203X) to rest platform tie angles using 1/2" x 1"

HHCS bolts (S-7935) and 1/2" flange nuts (S-8506).

NOTE: Install mounting channels with the flat side toward the trunking.

(See Figure 7E.)

Figure 7E Bolt hole locations for 42" rest platform mounting channels to tie angles.

Figure 7F Bolt hole locations for 48" rest platform mounting channels to tie angles.

See also other documents in the category Grain Systems Equipment: