Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 73)

9. 48" Head Platform Right Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 73
2. Place lower head section on solid and level surface.
3. Attach channel support assemblies (HSP484101) to both sides of the lower head as shown
removing bolts where necessary and replacing with 3/8" x 1" HHCS bolts (S-7515) and 3/8" wide
flange nuts (S-968).
(See Figure 9C below and Figure 9D on Page 74.)
4. Attach cross tie channel (HSP482CCS) between the ends of the main channel support assemblies
using 3/8" x 1" HHCS bolt (S-7515) and 3/8" flange nuts (S-968).
Figure 9C