beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 80

background image

9. 48" Head Platform Right Hand Drive

80

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

Decking Section: Down-Leg Hatch Side

NOTE: Be sure to install this section of decking by starting at the inside next to the toe board and

working outward.

1. Install the first deck plank (HSP48007X) on the hatch side at the down-leg end against the toe board

across all three (3) support channels (HSP42065X).

2. Next install the three (3) deck planks (HSP48008X) to the two (2) support channels (HSP42065X),

leaving an opening for the hatch.

3. Fasten the decking to the support channels (HSP42065X) using 5/16" x 1" flange bolts (S-7470) and

5/16" flange nuts (S-3611).

(See Figure 9K.)

Figure 9K

See also other documents in the category Grain Systems Equipment: