beautypg.com

Install safety cage – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 37

background image

6. Tie Angles, Ladders and Safety Cages

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

37

Install Safety Cage

Safety cages are 10' sections, with the exception of the 3' entrance section.

1. Locate safety cage hoops (LDR-BCKTBHP) along the ladder rails where the safety cage hoops will

be installed. NOTE: The end hoops of a 10' section are spaced 4' from the two (2) middle hoops,
which are spaced 2' apart.

See Figure 6W

for spacing.

(See Figure 6W.)

Figure 6W 10' Safety Cage Section

See also other documents in the category Grain Systems Equipment: