beautypg.com

Splice toe boards together – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 62

background image

8. 42" Head Platform Left Hand Drive

62

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

Splice Toe Boards Together

NOTE: Position bolt heads to the inside of the platform.

1. Place each set of toe board ends (HSP42015X and HSP42016X) together and line up bolt holes with

holes in splice plate (HSP42044X).

2. Fasten each set together using twenty (20) 3/8" x 1" HHCS bolts (S-7469) and 3/8" nuts (S-10028).

3. Place ends of “Z” toe boards (HSP42066X and HSP42038X) together and line up bolt holes with

holes in “Z” splice plate (HSP4248ZSPLX). Fasten each set together using twelve (12) 3/8" x 1"
HHCS bolts (S-7469) and 3/8" nuts (S-10028).

(See Figure 8L.)

Figure 8L

See also other documents in the category Grain Systems Equipment: