beautypg.com

Install rest platform deck plate – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 44

background image

7. Rest Platform

44

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

Install Rest Platform Deck Plate

NOTE: Location side is dependent upon through ladder opening.

1. Attach rest platform deck plate (RP482FDP) to the bottom of the rest platform cross channels

(RSP482CCX) and rest platform mounting channels (RSP48203X) using 3/8" x 1" HHCS bolts
(S-7469) and 3/8" flange nuts (S-10028).

2. Bolt heads must be installed against the deck plate.

(See Figure 7H below and

Figure 7I on Page 45.)

NOTE: The deck plate can be mounted on either the left side or right side, but the flange must always

be mounted towards the opening.

Figure 7H 42" Rest Platform Deck Plate

See also other documents in the category Grain Systems Equipment: