beautypg.com

Install handrails – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 66

background image

8. 42" Head Platform Left Hand Drive

66

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

Install Handrails

NOTE: Position bolt heads to the inside of the platform.

NOTE: Posts should be finger-tightened only until handrails have been installed. Some “free play” will be

required to property fit the handrails in place.

1. Loosely install hand rails to the top of the posts (HP1648HCP) as shown in

Figure 8P

using

5/16" x 2" HHCS bolts (S-7877) and 5/6" flange nuts (S-3611).

2. Once all handrails are in place, fully tighten platform posts to the toe boards and fully tighten the

handrails to the posts.

(See Figure 8P.)

Figure 8P

See also other documents in the category Grain Systems Equipment: