Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 11)

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 11
5. Ladder Assembly
Chapter 5: Ladder Assembly
The ladder sections are to be mounted directly to the trunking sections. Quantities and section lengths may
vary depending on overall height of system. If you have a non-standard height system, refer to supported
bucket height reference chart
below and on Page 12 for the correct ladder package for the system.
Supported Bucket Height Reference Chart for 42"
Part # Supported Bucket Height (Ft.) Part # Supported Bucket Height (Ft.)
42XRLAD50 50-59 42XWLAD50 50-59
42XRLAD60 60-69 42XWLAD60 60-69
42XRLAD70 70-79 42XWLAD70 70-79
42XRLAD80 80-89 42XWLAD80 80-89
42XRLAD90 90-99 42XWLAD90 90-99
42XRLAD100 100-109 42XWLAD100 100-109
42XRLAD110 110-119 42XWLAD110 110-119
42XRLAD120 120-129 424WLAD120 120-129
42XRLAD130 130-139 42XWLAD130 130-139
42XRLAD140 140-149 42XWLAD140 140-149
42XRLAD150 150-159 42XWLAD150 150-159
42XRLAD160 160-169 42XWLAD160 160-169
42XRLAD170 170-179 42XWLAD170 170-179
42XRLAD180 180-189 42XWLAD180 180-189
42XRLAD190 190-199 42XWLAD190 190-199
42XRLAD200 200-209 42XWLAD200 200-209
42XRLAD210 210-219 42XWLAD210 210-219
42XRLAD220 220-229 42XWLAD220 220-229
42XRLAD230 230-239 42XWLAD230 230-239