Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 54)

8. 42" Head Platform Left Hand Drive
54 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Attach Toe Board Channels to Cross Support Channels
1. Position the toe boards (HSP42018X) along the side of the lower head.
2. Align toe boards with the support channels as shown in Figure 8C below and Figure 8D on Page 54 .
3. Fasten to channels using four (4) 5/16" x 1" flange bolts (S-7470) and nuts (S-3611).
4. Install middle toe board (HSP42064X) to the end of the side toe boards using 1/2" x 1" HHCS bolts
(S-7935) and 1/2" flange nuts (S-8506).
Figure 8D