beautypg.com

Attach intermediate handrails to posts – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 67

background image

8. 42" Head Platform Left Hand Drive

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

67

Attach Intermediate Handrails to Posts

1. Cut 14" off the tube end of three (3) small intermediate handrails (LDR-4088) and three (3) large

intermediate handrails (LDR-4087).

(See Figure 8Q.)

2. Slide the small rail into the large rail and install one set at discharge end and other two (2) sets

opposite the discharge end on hatch side and adjust to fit.

3. Fasten using 5/16" x 1" flange bolts (S-7470) and 5/16" flange nuts (S-3611).

4. Install the remaining intermediate handrails around the platform using 5/16" x 1" flange bolts (S-7470)

and 5/16 flange nuts (S-3611).

Figure 8Q

See also other documents in the category Grain Systems Equipment: