beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 57

background image

8. 42" Head Platform Left Hand Drive

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

57

2. Locate the large holes in decking (HSP42033X) and orient the decking so that the end of the decking

with the greater length from the holes is towards the lower head.

3. Insert deck channel support angles (HSP42014) through the outside holes of the decking and attach

decking to the toe board (HSP42064SX) and support channel (HSP42032X) using 5/16" x 1" flange
bolts (S-7470) and 5/16" flange nuts (S-3611).

4. Attach deck channel support angles (HSP42014) to the lower head bearing angle (42HDBRGN)

using 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nut (S-100028).

(See Figure 8G.)

Figure 8G

See also other documents in the category Grain Systems Equipment: