beautypg.com

48" head platform right hand drive, Chapter 9 48" head platform right hand drive, Attach cross support channels to lower head – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 User Manual

Page 71: Chapter 9: 48" head platform right hand drive

background image

PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series

71

9. 48" Head Platform Right Hand Drive

Chapter 9: 48" Head Platform Right Hand Drive

NOTE: Right hand drive installation has shown. Left hand side installs the same but in opposite orientation

Attach Cross Support Channels to Lower Head

1. Align the bolt holes that are located next to the cross channel splice plate (HSP484039) of the cross

channels (HSP482007X) to the main support channel (HSP484101) located on the hatch side. They
all face the same direction except for the next to last on the discharge end. Fasten together using
eight (8) 3/8" x 1" HHCS bolts (S-7469) and 3/8" flange nuts (S-968).

(See Figure 9A below

and

Figure 9B on Page 72.)

Figure 9A

See also other documents in the category Grain Systems Equipment: