Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 89)

9. 48" Head Platform Right Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 89
Install the Hatch
1. Install left and right hatch hinges (HSP36033 and HSP36002) to the toe board (HSP42015X) at the
hatch location using 5/16" x 1" flange bolts (S-7470) and 5/16" flange nuts (S-3611).
2. Align the hinges (HSP36033 and HSP36002) to the inside of the deck hatch hinge angles
(GBS36224 or HSP484055X) already assembled to the hatch.
3. Fasten together using 3/8" x 1" HHCS bolts (S-7469), 3/8" washers (S-248) and 3/8" nylock nuts.
(See Figure 9T below and Figure 9U on Page 90.)
Figure 9T