Xerox WorkCentre Pro 215 User Manual

Page 54

Text mode
Original mode

Creating Pro 215 Floppy Disk Installation Diskettes

If floppy diskettes are required to install the WorkCentre Printer Driver Software, the user can create
a set of diskettes from CD-ROM.

To create a set of WorkCentre Pro Series Printer Driver floppy Diskettes, find a PC that has a floppy
diskette drive with a CD-ROM drive and follow the procedure below. Four or five blank high density
diskettes will be required.

For Windows:

1. Insert the WorkCentre CD into the CD-ROM Drive.

2. Click on the Start button and then choose the Run menu option.

3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter depending on your CD-

ROM Drive) in the command line box. Click on the OK button to proceed.

4. Follow the on-screen instructions.

To use the Floppy Disk Installation Disks created, follow the same procedure for your operating
system but refer to the floppy disk drive (A:\ or B:\) rather than the CD-ROM drive (D:).