Xerox WorkCentre Pro 215 - Manual (Page 45)

38
Counter access
Total copies/prints remaining on the drum cartridge
This counter displays the total number of copies/prints remaining on the drum in the machine. The
count can be used to determine when to reorder a new drum cartridge.
The count will be displayed in the display window as a sequence of 2-
3 digit values.
Example 1: 10,145 copies/prints will be displayed as 010 followed by 145
Example 2: 361 copies/prints will be displayed as 000 followed by 361
1. Select the Toner Saver mode.
2. Press again and hold the Image Quality key for
approximately 4 to 6 seconds.
• The light next to Auto mode will light.
• The lights within the Pro 215 Diagram will flash.
3. Press and hold the Clear key for 5 seconds.
• The count will continually be displayed until the Clear
key is released. There will be a slight pause at the
end, before displaying the count again.
4. Press the Image Quality key to return to the copy mode.