Xerox WorkCentre Pro 215 - Manual (Page 39)

32
– E2 Clearing the Paper Path
When a paper misfeed occurs the red misfeed indicator flashes on the copier diagram, and an E2
status code will flash in the display window. Paper misfeeds may occur in the areas shown below.
Follow the steps below to locate and clear the misfeed.
Paper Feed Area
Note: Ensure that the alternate paper tray is lowered.
1. Press the release lever to open the side cover.
Caution: Do not touch the shiny drum cartridge surface.
Scratches or smudges will result in poor copy quality.
Do not remove paper through the bypass. Unfused toner
may adhere in the area, resulting in smudged copies.
2. Carefully remove the misfed paper in the direction shown.
3. Lower the right side tray 2 access door.
4. Remove the misfed paper.
5. Close the access door.
If paper cannot be removed, skip to the Fuser Area.
6. Closer the side cover.
Fuser Area
Paper Feed Area
Exit Area