Xerox WorkCentre Pro 215 - Manual (Page 50)

43
Pro 215 Properties (Printer Driver)
The purpose of this section is to provide information about how to access and use the options in the
WorkCentre Pro PCL Series Printer Driver Properties dialog. Use the WorkCentre Pro PCL
Properties dialog to change the settings used for printing for both PCL 5e and PCL 6 drivers.
There are several ways to display the Printer Driver dialog, including:
• Displaying the Driver Properties dialog from an application
• Displaying the Properties dialog from the Start Menu
• Displaying the Properties dialog from the Xerox Printer Services Program (Status
Monitor)
Displaying the Driver Properties dialog from an application
Control of the driver settings is provided from the WorkCentre Pro PCL Series Properties
(Printer Driver) dialog box. The new driver settings will be active while the application is open.
The driver settings will return to the prior values when the application is exited.
Access to the Properties dialog will vary depending upon the application that is in use.
Note: The application may override any options that are selected using the Properties Dialog.
Windows 95/98 and NT:
1. Click Print on the application’s File menu
2. If not selected, select the Xerox WorkCentre Pro PCL Series printer
3. Click the Properties button
4. Change the print options and click OK