Velleman Central Management System - Manual (Page 36)

33
Function Description
Server Enter the SMTP server address provided from your e-mail system supplier.
Mail From Enter the entire mail address to ensure E-mails will not be blocked by SMTP.
Verify Password Some mail servers are required to verify the password. Please enter the “user name” and
“password”.
Email Address Add the E-mail address(s) of the assigned recipient(s).
9.3 Video
You can set the image resolution, quality and frame rate here.
Note: The options displayed here may vary based on the device you selected.
Item Description
Image Type
(JPEG / MPEG / H264) Select the image resolution (CIF / 4CIF) and quality (SUPER BEST / BEST / HIGH / NORMAL /
BASIC) here.
Frame Rate The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the network.
Set the desired image frequency to the maximum (FULL) or to a specified frame rate (1/2; 1/3; 1/4;
1/5; 1/10; 1/15; 1/20; 1/25; 1/30).
The actual frame rate depends on the actual network connection, and may be lower than the specified
one.
9.4 DVR
You can set DVR general functions, such as the host ID, daylight saving and key lock timeout.
Function Description
Host ID Set the host ID from 0 to 254. The default value is 0.
System Type It displays the current system type (NTSC / PAL). It’s automatically detected.
De-interlace Choose to reduce (ON) or ignore (OFF) the vibration of the paused picture.
Daylight Saving Specify whether to use daylight saving time (ON / OFF).