Velleman Central Management System - Manual (Page 27)

24
7.2.2 Record Type
There are four record types: User / Motion / Alarm / RETR. Check the record type you want to search.
Note: This section is available only when the “Record” tab is selected.
Function Description
User
Check this and all logs for manual recording will show. The log is generated when this function is enabled in “Address
Book”, and
or is selected in the main control panel.
Motion
Check this and all logs for motion recording will show. The log is generated When the connected device has detected a
motion event during the time specified in “Record Setting”.
Alarm
Check this and all logs for motion recording will show. The log is generated When the connected device supports the
alarm function and has detected an alarm event during the time specified in “Record Setting”.
RETR
Check this and all logs for RETR recording will show. The log is generated when the connected device supports the
R.E.T.R. function and this function is enabled in “8.1 DVR Control Panel”.
7.2.3 Log List
There are three log lists: Record, Backup & Event. By defaults, the log lists show all the logs. To quickly
search the logs you want, you can narrow down the list by time and / or record type.
Function Description
Reserve Select the log which is considered important and can’t be removed, and click it to prevent accidental removal.
Play Click it to know what’s recorded for the selected log.
Repair Select the log with “Error” checked, and click it to try to fix the file.
Delete / Delete All
Select a specific log you don’t need or all logs, and click “Delete” or “Delete All” to remove.
The log with “Reserve” checked will not be removed even when it’s selected to be removed.