Velleman Central Management System - Manual (Page 14)

11
4 FREQUENTLY-USED FUNCTIONS
4.1 Record
To record remotely, click “ ” or “ ” → “ ” to go to the “Record Setting” page. For details, please refer to “6.
RECORD” at page 21.
In the “Record Setting” page, you can set the following items:
‧ Record type
‧ Pre- / post-event record time (0~10 seconds)
‧ Record time setting
‧ Record path
Note: The record function will be disabled when the reserved disk capacity in “Reserved(MB)” is
larger than the current disk capacity in “Free(MB)”.
When “Manual” is checked, click “ ” or “ ” on the main control panel to start manual recording immediately,
and all recordings will be saved in the location specified in “Record Path”.
When “Motion” and / or “Alarm” are checked, the recording function will be enabled for a motion or alarm event,
and all recordings will be saved in the location specified in “Record Path”.
4.2 Playback
To play a recording, click “ ” or “ ”, and select the “Record” tab. A list of all recordings will be shown by
defaults, and you can also sort out the logs you want to speed up the search time. For details, please refer to “7.
STATUS LIST” at page 23.