Velleman Central Management System - Manual (Page 30)

27
Click or to display the PTZ control panel as follows.
Button
Function
Simplified Full Function
Description
Preset 1~16 1~16 1~16 Click to move the PTZ camera to the selected preset point.
Auto Pan
Click to activate the auto function.
Before using it, you need to assign a specific function that will be
enabled when “AUTO” is clicked. For details, please refer to the user
manual of the PTZ camera.
Auto Tracking
Click to activate the auto tracking function if the connected PTZ
camera supports it and have set the surveillance area.
Zoom In / Out / / Click to zoom in / out the image.
Focus Near / Far / / Click to adjust the focus of the image.
Max Zoom In / Out / /
Click to zoom in the image to the largest / zoom out the image to its
original size.
Arrow Keys -- --
Click to:
1. Move the camera lens up / up-left / down / up-right / left /
down-right / right / down-left.
2. Make selection.
Turbo Step
Speed up the menu selection from 1 to 10.
Ex: If the value of the turbo step is set to 5, one mouse-click will
function as 5 mouse-clicks when you click the arrow keys.
To use this function, you need to set it in the camera configuration
page first.
Auto Move
Click to enable the auto move function. It allows the camera to move
to the direction where your cursor stays.