2 configuration page for device access – Velleman Central Management System User Manual
Page 23

20
Button
Simplified
Full Function
Function
Description
Refresh
Click to update the available IP address list.
5.2 Configuration Page for Device Access
This page should contain the correct information for accessing your device remotely.
Function
Description
Transfer Method
Select “TCP” or “UDP” based on your connection situation.
IP Address / Port / User name / Password
Enter the IP address / port number / user name / password for accessing the device you want.
For details about network settings, please refer to “2. NETWORK CONNECTION” at page 2.
Get Type
Click “Get Type” for this software to identify the type of your device, and make sure the
corresponding functions available for the device will operate normally in this software.
Stream Format
Select the codec “MPEG4”, “JPEG”, “H264” or “Default” for streaming. The available options may
vary based on the device you want to access.
Av Option
Select “Video/Audio” or “Video” to ensure whether the web audio transmission is needed.
When your device supports web audio transmission but “Video” is selected, no audio is transmitted.
When your device doesn’t support web audio transmission but “Video/Audio” is selected, no audio is
transmitted.
Comment
(Optional) Enter a description for this device.
Event Sound / Event Sound Duration
Check “Event Sound” to enable the event alert sound, and it’s available to change the default alert
sound.
Then, select how long the alert sound will last (3 ~ 60 seconds) in “Event Sound Duration”.
Apply / Login
Click “Apply” to save the setting and return to “Address Book” panel, or click “Login” to save the
setting and directly log into the device immediately.
Cancel
Click “Cancel” to discard the setting.