VEGA VEGAMET 514… D - Manual (Page 46)

46 VEGAMET 514… D
–– Configuration outputs
–– Configuration current outputs
–– Current 1 to (coordination)
–– Current 2 to (coordination)
–– Current 2 Standard (Kind)
–– Current 3 to (coordination)
–– Current 3 Standard (Kind)
–– Configuration volt outputs
–– Volt 1 to (coordination)
–– Volt 2 to (coordination)
–– Volt 3 to (coordination)
–– Configuration relay outputs
–– Operating relay
–– Rel. 1 to (coordination)
–– Rel. 1 Standard (Kind)
–– Rel. 2 to (coordination)
–– Rel. 2 Standard (Kind)
–– Fail safe relay
–– Relay Standard
–– Configuration PC / PLC-outputs
–– PC / PLC-output
–– PLC 1 to (coordination)
bis
–– PLC 7 to (coordination)
–– PC / PLC-relay status
–– PC / PLC-input status
–– Configuration VEGADIS
–– DIS 1 to (coordination)
bis
–– DIS 7 to (coordination)
5 Diagnosis
5.1 Detailled menu list
Configuration
–– Configuration, inputs
–– Input 1 (analog)
–– Input of
–– Channel no.
–– Sensor characteristic values
or
–– Input 1 (VBUS)
–– Input von
–– Series no.
–– Sensor adaption
–– Input 4
–– Input of
–– Channel no.
–– Configuration meas. points
–– Application
–– Sensor
–– Kind
–– Options
–– Sensor coordination
–– MST1
–– MST-name, MST1
–– Fault signal
–– Tare
–– Monitoring
–– MST2, as MST1 (without tare)
–– Instrument address
(deleted up from Software-Version 6.0)
Diagnosis