Veris Industries H8936 Install - Manual (Page 2)

Z202662-0G PAGE 2 ©2012 Veris Industries USA 800.354.8556 or 1.503.598.4564 / [email protected] 09126
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
H8932/H8936 INSTALLATION GUIDE
DIMENSIONS
H8932 H8936
8.0”
(204 mm)
7.0”
(177 mm)
4.2”
(106 mm)
8.0”
(204 mm)
5.0”
(128 mm)
4x Ø 0.28”
(7.1 mm)
Front View Side View
Back View
8.0”
(204 mm)
2.2”
(57 mm)
8.0”
(204 mm)
4.8”
(122 mm)
Front View Side View
5.8”
(147 mm)
5.3”
(135 mm)
Mounting plate template
(plate not provided with the H8932)
OPERATION
The H8932/H8936 Network Display is designed to provide an easily visible display
for data collected by Modbus metering devices. The H893x is connected in series,
downstream from the Modbus master and upstream from the meters. All data values
collected by all supported meters are viewed, except for a limited data set for E3x
panelboard monitors. See the section titled Data Values for Supported Devices for
lists of data values that are presented on the Network Display.