Commissioning guide, Configure device button – Veris Industries E3X Commissioning Guide User Manual

Page 5

PAGE 5

03112

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

COMMISSIONING GUIDE

E3x

Configure Device Button

After scanning for devices, the tool locates all E3x meters connected to the system. Select a meter from the list and click the Read From Device button to configure.

1. General.

Select the CT configuration used in the installation. This tab looks different for the E30 and E31 devices, with only the options for the selected device appearing as
options. The Device Location is an optional description the installer can enter to specify the location of each device on the network. Note: If the configuration tool is
opened on a computer not connected to a meter, the tool defaults to the E30 General tab.

E30 General Tab

E31 General Tab

2. Demand.

Select the number of sub-intervals and the sub-interval length to be used in data collection.