Ohaus CKW WASHDOWN CHECKWEIGHING SCALES_INDICATOR Manual en - Manual (Page 14)

EN-10 CKW-55 CHECKWEIGHER
3.2 Control Functions
Primary Function (Short Press)
Secondary Function (Long Press)
Navigation Function (Menu Mode)
•
Turns the indicator on.
•
If indicator is on, sets zero.
•
Turns indicator off.
Off
ON/ZERO
Yes
•
Enters the current menu shown on the display.
•
Accepts the current setting on the display.
PRINT
•
Sends current display value to the serial interface.
Units
•
Changes the weighing unit.
No
•
Advances to the next menu.
•
Rejects the current setting on the display and advances to the next available setting.
G/N/T
•
Displays gross, net and tare values.
Menu
•
Enters menu mode.
Back
•
Moves backwards through upper and medium level menus.
•
Backs out of lower level menus and settings.
TARE
•
Performs tare operation.
•
Saves pre-set tare after numeric entry.
•
Exits the present mode and returns directly to the weighing mode.
LIBRARY
•
With Library mode on, initiates library view/entry/edit sequence.
Save
•
With Library mode on, saves library data and loads to active weighing mode.
NEXT+/-
•
Adds displayed weight into accumulation memory.
•
Toggles numeric data entry between + and -.
•
Displays statistical information of accumulated weighing memory.
TARGET
•
With checkweigh mode on, initiates target view/entry/edit sequence.
•
Saves and steps through target data.
Exit
Primary Function Secondary Function Navigation Function
TABLE 3-2. CONTROL FUNCTIONS.