M&C TechGroup GL Data sheet - Manual (Page 4)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
11.5
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/06.06
Sealing ring screwed connectors may be applied where it is required to connect FLEXIBLE and RIGID
Tube.
Tube connectors are used for the following M&C-gas coolers:
ECP-1 Sample Gas IN/OUT
Condensate OUT 6 mm
12 mm
ECM-2SS,ƒECM-2PV Sample Gas IN/OUT 6 mm
Material PP = Polypropylene Material PVDF = Polyvinylidenfluoride
Pressure 0,4 up to 6 bar abs. 0,4 up to 6 bar abs.
Operating temperature max. +60 °C max. +80 °C
Storage temperature -20 °C bis +80 °C -20 °C bis +120 °C
Technical Data
“GL’’ Glass connectors are used in the following M&C Products:
CompressorƒgasƒcoolerƒEC;ƒEC-S;ƒEC-EX;ƒEC-30;ƒECC;ƒECM Sample Gas IN/OUT
Condensate OUT GL 18
GL 25
PeltierƒgasƒcoolerƒECP-1/GL;ƒECP-1000,ƒ2000,3000;ƒECP-20-1/2 Sample Gas IN/OUT
Condensate OUT GL 18
GL 25
FilterƒF..-..-D Condensate OUT GL 25
FlowmeterƒFM-1 Sample Gas IN/OUT GL 18
FlowmeterƒwithƒneedleƒvalveƒFM-10 Condensate OUT GL 18