M&C TechGroup GL Data sheet - Manual (Page 2)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
11.5
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/06.06
GL-Sealing Ring
GL-Compression Nut
Sealing Ring / compression nut:
...DN
2
3
GL-Straight Adapter Connecting Adapters for GL to straight compression stud couplings:
GL-Straight Adapter
Pos. 1
Material: PVDF Part
Number GL-Compression
Ring
Pos. 2
Material:PTFE
Silicone Part
Number GL-Compression Nut
Pos. 3
Material: Pressed
Material Part
Number
GL18 / DN 4/6 09F9500 GL18-8 DN/mm 91F1015 GL18 Standard 91F1005
GL18 / DN 6/8 09F9510 “ “ “ GL18/14* 91F1007
GL25 / DN 4/6 09F9520 GL25-12 DN/mm 90F0025 GL25 Standard 90F0020
GL25 / DN 6/8 09F9525 “ “ “ “ “ “
GL25 / DN10/12 09F9530 “ “ “ GL25/18* 90F0022
...DN
DN...
3
1
2
GL-Nipple Adapter Connecting Adapters for GL-25 to flexible tube nipples:
* with large hole
GL-Straight Adapter
Pos. 1
Material: PVDF Part
Number GL-Compression
Ring
Pos. 2
Material: PTFE
Silicone Part
Number GL-Compression
Ring
Pos. 3
Material: Pressed
Material Part Number
GL25 / 10/12 09F9540 GL25-12 DN/mm 90F0025 GL25 Standard 90F0020
DN10/12
...DN
3
1
2
GL-Sealing Ring
Pos. 2
Material:
PTFE, Silicon Part
Number GL-Compression Nut
Pos. 3
Material: Pressed material Part
Number
Normally the "GL-18"
Connector is fitted with
a 6 mm i.d. sealing ring
and the "GL-25" with one
of 12mm i.d. (standard) GL18-6 DN /mm 91F1010 GL18 Standard 91F1005
GL18-8 DN/mm 91F1015 “ “ “
GL18-10 DN/mm 91F1020 “ “ “
GL25-8 DN/mm 90F0035 GL25 Standard 90F0020
GL25-10 DN/mm 90F0030 “ “ “
GL25-12 DN/mm 90F0025 “ “ “
Adjustable angle
threaded coupling
Adjustable angle threaded coupling:
Angle connectors may be applied where it is NOT POSSIBLE to use a straight connectors. These angle couplings are a SURE method of
joining FLEXIBLE TUBE where pressures are <1 bar g..
Adjustable Connector
Pos. 1
Material: PP
or PVDF Part
Number GL-Compression
Ring
Pos. 2
Material:PTFE
Silicone Part
Number GL-Compression
Nut
Pos. 3
Material: Pressed
Material Part
Number
GL18 / DN 4/6-PP 05V6000 GL18 - 6 DN/mm 91F1010 GL18 Standard 91F1005
GL18 / DN 4/6-PV 05V6010 “ “ “ “
GL18 / DN 6/8-PP 05V6003 GL18 - 8 DN/mm 91F1015 “ “
GL18 / DN 6/8-PV 05V6025 “ “ “ “
GL25 / DN 4/6-PP 05V6001 GL25 - 8 DN/mm 90F0035 GL25 Standard 90F0020
GL25 / DN 4/6-PV 05V6011 “ “ “ “
GL25 / DN 6/8-PP 05V6003 “ “ “ “
GL25 / DN 6/8-PV 05V6025 “ “ “ “
GL25 / DN10/12-PP 05V6005 GL25 -12 DN/mm 90F0025 “ “
GL25 / DN10/12-PV 05V6015 “ “ “ "
3
1
2