M&C TechGroup MP-F10_R Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
10.9
Embracing Challenge
ƒ ƒ
Corrosion resistant
ƒ ƒ
100% lubricant free
ƒ ƒ
Gas tight
ƒ ƒ
Maintenance free
ƒ ƒ
Long service life
ƒ ƒ
variable connection possibilities
ƒ ƒ
Also with integrated bypass valve in the
pump head for adjustment of the pump
capacity
Special Features
Analytical Bellows Pump
Series MP®
Version MP-F05, MP-F10, MP-F05/R, MP-F10/R
MP-F10
Application
This bellows pump MP-F is suit-
able for corrosive gases. It is constructed
especially for problems in the analysis tech-
nique.
Description
All sample contacting parts of the bel-
lows pump MP-F are corrosion resist-
ant. As option for piping the upper pump
head part is available in stainless steel.
The pump works absolutely lubricant free, so
gases remain analytically unchanged. Due to
a special bellows and valve system, the pump
operates maintenance-free with a long serv-
ice life. The simple valve design guarantees
low maintenance costs.
The pump is available in 230V or 115V and in
two capacity variants.
For adjustment of the pump capacity a need-
le valve is built into the pump head of the
MP-F../R as an internal bypass.
Optional a needle valve can be build
into the pump-head to adjust the
flow rate.
Gas connection can be effected from above
or laterally. The pump head also can be rotat-
ed and mounted in 90° steps.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/11.06