M&C TechGroup FP-200P190-D Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
7.12
Embracing Challenge
ƒ ƒ
Universal in use
ƒ ƒ
Simple construction
ƒ ƒ
Simple assembly and maintenance
ƒ ƒ
Condition of filterelement visible from
outside
ƒ ƒ
Wall mounting
Special Features
Universal bypass filter series FP®
for liquid filtration
Version FP-70P200-D, FP-70P190-D, FP-200P190-D
FP-70P190-D
Application
The M&C universal bypass filter is used in
liquid analysis for filtration of low sample flow
rates. Two different filtration methods are
available:
1. Filter Type FP-70P200-D:
Filtration of a liquid flow in a set-
tling area.
2. Filter Type FP-70 (200) P190-D:
Filtration of a liquid flow with self-
cleaning effect through a bypass
system with fast flow rate over
the active filter surface.
Description
The basic construction of the bypass filter
corresponds with the line of universal filters
which are used for the gas filtration. The coar-
se sieve filter element is supplied with a pore
size of 70 or 200 µm and is manufactured
out of PP including the supporting pillar. The
filter element is screwed into the filter head
together with the filter element holder.
Through the glass filter body, the condition of
the filter element is visible at any time without
dismantling the filter. For changing the filter
elements no tools are necessary.
The optimal positioning of the o-ring gua-
rantees a safe sealing of the filter body to the
filter head. The sample outlet may be turned
around by 180 ° at the wall mounting bracket
so that a flexible handling of the mountage
is possible according to different local con-
ditions. The sample connections are located
in the filter head and in the lower part of the
filter glass.
Respective tube connectors and GL25 adap-
tors DN4/6, 6/8, 8/10 or 10/12 are optionally
available.
In order to obtain the desired self-cleaning
effect, the bypass filters FP-70 (200) P190-D
should be operated with a minimum bypass
quantity of 300 l/h.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/11.06