M&C TechGroup PSS-10_1 Data sheet - Manual (Page 3)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
14.6
Technical specifications and illustrations are without
obligation, subject to modifications. 10.96/12.11
Gas Conditioning Unit series PSS® version PSS-10/1
Part No. for 230V 50Hz version 01G5000
Part No. for 115V 60Hz version 01G5000a
Sample outlet dew point range of adjustment: +2 °C ..... +15 °C, factory setting: +5 °C
Dew point stability at constant conditions < ±0,1 °C
Sample inlet temperature **max. 80 °C optional: **max.180 °C with stainless steel bulkhead union
Sample inlet dew point **max.+80 °C
Gas flow rate **max. 480 Nl/hr
Ambient temperature **+5 °C up to +40 °C
Storage temperature -25 °C up to +65 °C
Pressure 0,7 bar up to 1,4 bar abs.
Total cooling capacity **max. 80 kJ/hr
Number of gas inlets 1
Number of gas outlets 1 optional: max. 4
Medium connections tube connection 4/6 mm
Material of sample contacting parts stainless steel, glass, PVDF, Viton ® , Novoprene ®
Ready for operation approx. 10 min.
Power supply 230V 50Hz or 115V 60Hz
Power consumption max. 350VA; with option temperature controller and heated sample line 230V: max.1730VA 115V:max. 1040VA
Fuse protection 4A t, 5x 20 mm, with option temperature controller: 6,3A t
Electrical connection Cold appliance plug with 2 m of cable
Case protection IP20 (DIN 40050. IEC 529)
Housing portable aluminium-frame case
Housing dimensions 555 mm x 460 mm x 290 mm (H x W x D)
Electrical equipment standard EN61010
Weight approx. 24 kg
Options Type Part No.
Further sample gas outlet Parallel samplegas outlet, tubing via T-piece on lateral PVDF bulkhead fitting, DN4/6,
max. 4 pieces 01G9065
Flowmeter, max. 4 pieces FM40 7-70 l/hr air, mounted in sample gas outlet
FM40 15-150 l/hr air , mounted in sample gas outlet
FM40 25-250 l/hr air , mounted in sample gas outlet
FM40 50-500 l/hr air, mounted in sample gas outlet 01G9070
01G9075
01G9080
01G9085
Fittings out of PVDF Fittings out of PVDF instead of PP and 3m FPM sample tube DN4/6 01G9025
Sample tube Sample tube out of Kanthal ® ø 6 mm, length 1 m, sampling temperature max. 1300 °C 01G9030
Liquid alarm Liquid alarm LA 1/1.4, consisting of: liquid alarm sensor LA1, controller LA1.4, filter glass
F120G-D with GL connection incl. mountage/wiring. In case of condensate inrush,
the sample gas pump is automatically switched of. 01G9035
3-way ball valve 3L/PV-1 for switching over from test gas to sample gas, in the inlet of the sample gas
conditioning unit, mounted with mounting brackets, fitting PVDF 01G9046
5-way ball valve 5L/PV-1 for switching over from test gas to sample gas, in the inlet of the sample gas
conditioning unit, mounted with mounting brackets, fitting PVDF 01G9045
Electronic temperature con-
troller for max. 12 m
heated sample line 100W/m 701 control range 0-200 °C, inlet PT100, power 230V 50Hz,
Contact capacity 250V
AC max. 4A, completely mounted incl.
7-pin plug 10A
01G9055
Electronic temperature con-
troller for max. 12 m
heated sample line 100W/m 701 control range 0-200 °C, inlet PT100, power 115V 60Hz,
Contact capacity 250V
AC max. 4A, completely mounted incl. 7-pin plug 10A
01G9055a
Connecting adapter DN4/6 for
heated sample line PSS-10 connecting adapter with bending protection for rigid mountage
of heated sample line with interchangeable PTFE tube DN4/6, consisting of
stiffening plate, Swagelok fitting with 4mm cartridge, material: SS316Ti. 01G9062
Connecting adapter DN6/8 for
heated sample line PSS-10 connecting adapter with bending protection for rigid mountage
of heated sample line with interchangeable PTFE tube DN6/8, consisting of
stiffening Swagelok fitting with 4mm cartridge, material: SS316Ti. 01G9063
Technical Data
PP = Polypropylene
PTFE = Polytetrafluoroethylene (Teflon ® )
PVDF = Polyvinylidenfluoride
** Maximum values in technical data’s must be rated in consideration of total cooling capacity at 25 °C ambient temperature and 5 °C outlet dew point.
Other versions on request.