M&C TechGroup SL1-8 DN... Data sheet - Manual

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
11.7
Embracing Challenge
ƒ ƒ
Different materials
ƒ ƒ
Accurate to size
ƒ ƒ
Different diameters
Special Features
Sample Lines Type SL1-8 DN...
for application in the gas analysis technique
SL1-8 DN...
Application
The accurate M&C sample lines SL1-8 -... are
applicable in the gas analysis technique for
flexible respectively stationary applications,
carrying sample gas, check gas, compressed
air, exhaust gas, ventilation gas, condensate
and liquid samples. The sample lines can
be directly connected to our tube fittings,
presented in chapter 11.. of our catalogue.
The flexible tubes are available in various
dimensions and materials.
Description
The M&C sample lines SL1-8 -... can be
delivered in below mentioned lengths.
The lengths of the tube coils from 40 m can
vary by ±5 m.
The tube material and dimensions have
to be selected according to the sam-
ple conditions. The technical data show
the temperature and pressure ranges of
the lines. Our leaflet 15.4 contains additional
information about delay time and differential
pressure depending on the tube dimensions,
tube lengths and the sample flow rate.
Technical specifications and illustrations are without
obligation, subject to modifications. 02.96/12.06