M&C TechGroup ECP 20-2 Data sheet - Manual (Page 3)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
6.2
Technical specifications and illustrations are without
obligation, subject to modifications. 05.97/06.06
Gas Cooler series ECP ® ECP 20-2
Part No. Gas Cooler ECP 20-2 01K8100 01K8140 01K8120
Material of heat exchanger Duran glass ® PVDF SS 316Ti
Gas pressure max.-bar abs.
2)
with GL adapter 2 / 3
2)
3 10**
Sample gas connection for ø 6 mm o.d. tube G1/4"i
Condensate connection for ø 12 mm o.d. tube G3/8"i
∆P at 500 Nl/hr flow rate 5 mbar
Stagnant space per heat exchanger approximately 70 ml
Gas stream / Gas flow rate 1x max. 500 Nl/hr *
Ambient temperature +5 to +45 °C
Storage temperature -20 to +60°C
Sample outlet dew point range of adjustment: +2 °C ..... +15 °C, factory setting: +5 °C
Dew point stability at constant conditions < ± 0,1 °C
Sample inlet temperature max. 180 °C*
Sample inlet dew point max. 80 °C*
Total cooling capacity at +25 °C ambient 80 kJ/h
Main power connection / Power consumption 230V 50Hz or 115V 60Hz switchable, 250VA
Ready for working <20 min.
Electrical connection terminals 2,5 mm
2
, 2x PG11 cable gland
Status alarm 1 changeover contact, potential free contact rating 250V, 2A, 500VA, 50W alarm point: ∆ ±3 °C to T
SOLL
Case protection / Electrical standard IP54 EN60529 / EN61010
Method of mounting / Case colour wall mounting / case colour black
Dimension / Weight 210x385x 226 mm / 12,5 kg
* Maximum values in technical datas must be rated in consideration of total cooling capacity at 25 °C ambient temperature and an outlet dew point of 5 °C.
** Other versions on request.
GL-adapter and tube fittings for the connection of different tube diameters at the heat exchanger see chapter 11, data sheet 11.5 and 11.6.
Technical Data