M&C TechGroup SP3000 Data sheet - Manual (Page 4)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
2.9
Technical specifications and illustrations are without
obligation, subject to modifications. 10.04/11.12
Options pre-filter* and extension tubes
Optionen Version Artikel-
Nr.
Stainless steel pre-filter with volume displacer, length 220mm, 46mm o.d., filter porosity 2µm,temperature max. 600°C, material
SS316 V20-0 20 S 9105
Hastelloy pre-filter with volume displacer, length 220mm, 46mm o.d., filter porosity 2µm, temperature max. 900°C, material
Hastelloy-C V20-0/HC 20 S 9115
Stainless steel pre-filter with volume displacer, length 520mm, 60mm o.d., filter porosity 2µm, temperature max. 600°C, material
SS316 V20-1 20 S 9145
Hastelloy pre-filter with volume displacer, length 520mm, 60mm o.d., filter porosity 2µm, temperature max. 900°C, material
Hastelloy-C V20-1/HC 20 S 9155
Hastelloy pre-filter with volume displacer, length 520mm, 60mm o.d., filter porosity 0,5µm,temperature max. 900°C, material
Hastelloy-C V20-1/HC 20 S 9156
Stainless steel pre-filter with volume displacer, length 300mm, 31mm o.d., filter porosity 2µm, temperature max. 600°C, material
SS316 V20-3 20 S 9300
Extra charge for extension of insitu stainless steel filter V20-3 or V20-4 for each 100 mm further length (from standard length
300mm to .... mm), max. 1000 mm total filter length, material: SS316 V20-3 20 S 9310
Backflushable hose pre-filter with internal support tube, length: 400mm, 40mm o.D., filter porosity 15µm,temperature max. 200°C,
material PTFE, SS316 V20-T 20 S 9315
Insitu ceramic filter tube in double-layer version for high blow back efficiency, with volume displacer, length 500mm, 40mm o.d.,
filter porosity 1µm, temperature max. 1000°C, material ceramic, SS316, connection G3/4" V12-1A-1 20 S 9559
Extension tube for V20.. with internal volume displacer , length 500mm, temperature max. 600°C, material SS316 Vm500 20 S 9165
Extension tube for V20.. with internal volume displacer , length 1000mm, temperature max. 600°C, material SS316 Vm1000 20 S 9170
Extension tube for V20.. with internal volume displacer , length 1500mm, temperature max. 600°C, material SS316 Vm1500 20 S 9175
Temperature classes for sampling from Ex-zone 20, 21 or 22
* For a valid Ex-approval according to ATEX, only operate the probe SP3000 with one of the above listed pre-filters
For choosing the adequate pre-filter see data sheet 2-1.1.0.8 as well
Type Possible Options Marking Temperature class Max. process gas temp. (°C) at
probe entry Max. surface temperature (°C)
SP3000
II 1 D / 2 GD
T6 ≤ 80 80
SP3000
II 1 D / 2 GD
T5 ≤ 95 95
SP3000 /RS, /HEX4-135
II 1 D / 2 GD
T4 ≤ 130 135
SP3000 /RS, /HEX4-180
II 1 D / 2 GD
T3 ≤ 195 195
SP3000 /RS
II 1 D / 2 GD
T2 ≤ 200 200