M&C TechGroup MP30 Operator's manual - Manual (Page 10)

10
Gas sampling and gas conditioning technology 6-1.3.5-ME
9 DIMENSIONS
The dimensions of the MP30 are shown below:
Figure 2 Dimensions (mm) MP30
10 RECEIPT AND STORAGE
 Carefully remove the diaphragm pump and any accessories from the transport packaging
immediately upon receipt and check the delivery against the delivery note.
 Check the contents for possible transport damage and immediately notify the transport insurer of
any damage.
N O T E !
The diaphragm pump should be stored in a protected, frost-free room.
11 INSTALLATION INFORMATION
The safety rules and regulations for the prevention of accidents must be observed during installation
and also subsequent operation. The information in Chapter 3‚ “Safety” must be observed.