EVS IPDirector Version 5.6 - May 2009 Part 3 User's Manual - Manual (Page 46)

IPDirector Version 5.6 – User Manual – Part 3: Browsing
EVS Broadcast Equipment – May 2009
Issue 5.6.D
35
Command Description
the clip level.
See also section ‘How to Duplicate or Move a Clip
Specifying an Exact Location’ on page 41.
Move Opens a Move Clip window where you can specify the
location on an XT[2] server of the XNet Network where the
clip should be moved.
This command is not available for files.
See also section ‘How to Duplicate or Move a Clip
Specifying an Exact Location’ on page 41.
Link Allows you to link selected clips manually. It is only
possible to link clips that are not already associated with
other clips.
See section ‘How to Link Clips’ on page 53.
Unlink Allows you to unlink the clips linked to the selected clips.
Properties Displays information related to the owner and the groups
the selected clip has been published to.
See section ‘How to View the Clip Properties’ on page 52.
4.7 EDITING A CLIP
4.7.1 H
OW TO
E
DIT A
C
LIP
F
ROM
W
ITHIN THE
D
ATABASE
E
XPLORER
To edit the clip data, proceed as follows:
1. Select the clip or a clip element.
2. Right-click and select Edit.
The Edit Clip window appears offering the ability to add or change clip data. For
more information on the Edit Clip window, refer to section “Edit Clip Window”
below.
4.7.2 E
DIT
C
LIP
W
INDOW
In the Edit Clip window you can add or change clip data. It is accessible from the
clip contextual menu in the Database Explorer.
Changes are applied to all elements in the same clip, since all elements share the
same metadata.