EVS IPDirector Version 5.6 - May 2009 Part 3 User's Manual - Manual (Page 19)

Issue 5.6.D IPDirector Version 5.6 – User Manual – Part 3 – Browsing
EVS Broadcast Equipment – May 2009
8
2.3.4 P
HOTO
B
UTTON
When a player channel is associated to the Database Explorer and a clip is loaded
on the Control Panel associated to the same player channel, you can press the
Photo button on the Database Explorer toolbar or type SHIFT+P on the keyboard
to grab a thumbnail for the loaded clip. See procedure hereafter.
C
REATING
T
HUMBNAILS IN
D
ATABASE
E
XPLORER
To be able to create thumbnails, a control panel with video display window must
be associated to the Database Explorer window.
To establish the association, the Player Channel displayed in the Video Display
needs to be assigned to the Database Explorer as explained above in 12.1 ‘How to
Assign a Player Channel to the Database Explorer’ on page 107.
When a clip is loaded on the Control Panel, you can press the Photo button on the
Database Explorer toolbar or type SHIFT+P on the keyboard to grab a thumbnail
for the loaded clip.
Note
For IPDirector to create a thumbnail in this way, the output of the
selected channel must be connected to an input of the workstation’s
video board and the picture displayed in a video display window on the
VGA.
Note
Thumbnails can be created automatically when there is an XFile or
XTAccess designated within the thumbnails configuration in the
IPDirector Remote Installer. Please see the Technical Reference manual
for further details.