EVS EPSIO Version 1.60 - July 2010 User's Manual - Manual (Page 13)

Issue 1.60.C Epsio Version 1.60 – User’s Manual
EVS Broadcast Equipment - July 2010
2.1.3 S
AVING AND
M
ANAGING THE
C
ONFIGURATION
The commands available in the the File menu allow you to save and manage the
configuration you will perform. The configuration, which includes the camera
calibration and the chroma key definition, is saved in a configuration file that is
made up of two .xml files:
• A file containing the playfield distances and all camera angle definitions.
This file is ‘name’.xml where is the name the user gives to the
configuration when it is saved for the first time.
• A file containing the chroma key configuration.
This file is ‘name’.CK.
In the File menu, you have access to the following commands:
Command Use
New Use this command before you start a new calibration.
This creates a new empty configuration file that you can save
throughout the calibration process.
Load Use this command to point to and load an existing configuration file.
Save Use this command to save your calibration while you define it.
It is recommended to save the configuration after each calibration
step.
Save As Use this command if you want to save the open configuration file
into a new name, for backup purposes, or to start a new calibration
from an existing one.
The configurations are stored by default in the following location:
C:/Program Files/EVS Broadcast Equipment / Epsio/Config.
8