EVS EPSIO Version 1.60 - July 2010 User's Manual - Manual (Page 11)

Issue 1.60.C Epsio Version 1.60 – User’s Manual
EVS Broadcast Equipment - July 2010
1.3.4 C
AMERA
A
NGLE
L
IST
The Camera Angle list shows a thumbnail for each camera angle that has been
defined and/or calibrated. You can select a camera angle by clicking the
thumbnail. This Camera Angle list is particularly useful in the Calibration phase.
When the camera angle has only been created, but not calibrated yet, the
thumbnail shows a grey background and the virtual playfield.
When the camera angle has been calibrated, the thumbnail shows the frame
grabbed from the video signal.
1.3.5 Z
OOM
The zoom area shows a zoomed display of the area around the mouse pointer on
the operating monitor. It mainly allows performing the calibration, as well as other
actions, in a very précised way.
1.3.6 T
ABBED
A
REA
The tabbed area gives access to the following tabs, in which you can configure
Epsio and select the animations you will perform:
• The CALIB tab allows the users to define and calibrate the camera angles.
See also the section 2.3.2 ‘Calibration Tab’, on page 12.
• The TOOLS tab allows the users to select the animations they want to perform,
and refine the settings for these animations.
See also the section 2.5.2 ‘Tools Tab’, on page 40
• The CHROMA tab allows the users to define the chroma key layer that will
define how the offside line animation will be displayed.
See also the section 2.4.5 ‘Chroma Key Tab in Epsio’, on page 34.
6